Odd Angle EPDM Air Intake Elbows

Odd angle EPDM air intake elbow that complies with the increased expectations of modern diesel and gas powered engines. Available for OEM and aftermarket applications.

• Specifically formulated EPDM compound.
• Available in nitrile, chloroprene and silicone compounds.
• Odd Angle Elbow 180L70R50WF is molded with integrated ribs
• Can be custom formulated to meet specified end use application.
• Custom-cut lengths available.
• Vacuum collapse rating exceeds 54.4 inH₂O.
• Recommended service temperatures: -40°F to +250°F.
• Complies with physical and mechanical property requirements per ASTM D2000 3BA715A14B13C12F17.
  • Hardness Durometer, ASTM D2240, Type A, 70±5 Shore A Hardness Points.
  • Tensile Strength, ASTM D412, Die C, 1500 psi., minimum.
  • Ultimate Elongation, ASTM D412, Die C, 250%, minimum.
  • Air Age Testing, ASTM D573, 70 hrs. at 100°C (212°F).
  • Hardness Durometer Change, +10, maximum.
  • Tensile Strength Change, -25%, maximum.
  • Ultimate Elongation Change, -25%, maximum.
  • Compression Set Testing, ASTM D395, Method B, 22 hrs. at 70°C (158°F), 25% maximum.
  • Ozone Resistance Testing, ASTM D1171, Method A, Exposure Rating, 72 hrs. at 40°C (104°F), 50 pphm, No Cracks Low Temperature Resistance Testing, ASTM D2137, Method C. Non Brittle after 3 Minutes at -40°C (104°F)."