Inserts

Designed to meet unique transition requirements in air intake systems.

  • Allows for variation in pipe diameter and tolerance build up.
  • Internal seal rings give a positive seal to piping.
  • Specifically formulated EPDM compound.
  • Available in nitrile, chloroprene and silicone compounds.
  • Can be custom formulated to meet specified end use application.
  • Other combinations of inserts available upon request.
  • Vacuum collapse rating exceeds 54.4 inH₂O.
  • Recommended service temperatures: -40°F to +250°F.
  • Complies with physical and mechanical property requirements per ASTM D2000 3BA715A14B13C12F17.
    • Hardness Durometer, ASTM D2240, Type A, 70±5 Shore A Hardness Points.
    • Tensile Strength, ASTM D412, Die C, 1500 psi., minimum.
    • Ultimate Elongation, ASTM D412, Die C, 250%, minimum.
    • Air Age Testing, ASTM D573, 70 hrs. at 100°C (212°F).
    • Hardness Durometer Change, +10, maximum.
    • Tensile Strength Change, -25%, maximum.
    • Ultimate Elongation Change, -25%, maximum.
    • Compression Set Testing, ASTM D395, Method B, 22 hrs. at 70°C (158°F), 25% maximum.
    • Ozone Resistance Testing, ASTM D1171, Method A, Exposure Rating, 72 hrs. at 40°C (104°F), 50 pphm, No Cracks Low Temperature Resistance Testing, ASTM D2137, Method C. Non Brittle after 3 Minutes at -40°C (104°F)."
Legend

R: Reducer
S: Short
NL: No Lip
L: Extra Long Insert

ASTM D2000 View
ASTM D2240 View
ASTM D412 View
ASTM D573 View
ASTM D395 View
ASTM D1171 View
ASTM D2137 View
40R30

Specifically formulated EPDM compound.

Available in nitrile and chloroprene and silicone compounds.

Vacuum collapse rating exceeds 54.4 inH₂0

Recommended service temperatures: -40℉ to +250℉

Complies with physical properties requirements of ASTM D2000 3BA715A14B13C12F17.

  1. Specifically formulated EPDM compound.
  2. Available in nitrile and chloroprene and silicone compounds.
  3. Vacuum collapse rating exceeds 54.4 inH₂0
  4. Recommended service temperatures: -40℉ to +250℉
  5. Complies with physical properties requirements of ASTM D2000 3BA715A14B13C12F17.

Inserts

MR PartPartIDOD1OD2HT
20R1029020111.002.002.501.000.50
20R1529020131.502.002.501.000.25
20R17529020211.752.002.501.000.13
225R2029020232.002.252.751.000.13
25R17529020961.752.503.001.000.38
25R2029020472.002.503.001.000.25
25R22529020542.252.503.001.000.13
30R2029033752.003.003.501.000.50
30R22529033262.253.003.501.000.38
30R23629032992.363.003.501.000.32
30R2529033002.503.003.501.000.25
30R27529033182.753.003.501.000.13
30R275S29033192.753.003.500.750.13
35R3029033793.003.504.001.000.25
40R27529043402.754.004.501.000.63
40R3029043083.004.004.501.000.50
40R32329043103.234.004.501.000.38
40R3529043163.504.004.501.300.25
40R37529043573.754.004.501.300.13
45R3529043323.504.505.001.500.50
45R37529043653.754.505.001.500.38
45R4029043244.004.505.001.500.25
50R43329053704.335.005.501.500.33
50R4029053054.005.005.501.500.50
50R4529053214.505.005.501.500.25
50R45NL29053624.505.005.001.500.25
50R47529053474.755.005.501.500.13
55R4029053134.005.506.001.500.75
55R4529053544.505.506.001.500.50
55R5029053395.005.506.001.500.25
60R5029063035.006.006.501.500.50
60R52529063455.256.006.501.500.38
60R5529063115.506.006.501.500.25
65R4529063534.506.507.001.501.00
65R5529063295.506.507.001.500.50
65R6029063376.006.507.001.500.25
70R5029073195.007.007.501.501.00
70R5529073275.507.007.501.500.75
70R6029073016.007.007.501.500.50
70R62529073436.257.007.501.500.38
70R662529073446.637.007.501.500.19
70R6529073356.507.007.501.500.25
80R6029083176.008.008.501.501.00
80R7029083097.008.008.501.500.50
80R70L29083337.008.008.502.000.50
90R8029093078.009.009.501.500.50
110R100291104010.0011.0011.501.500.50
130R120291303012.0013.0013.501.500.50