NO HUB Couplings

Shielded couplings connect Cast Iron hubless soil pipe and fittings in sanitary and drain waste and vent (DWV) applications. For non-pressure, gravity flow applications only. Recommended for above and underground installations. Easy to install and reuse.

Multiple sizes from 1.5" to 10".
12", 15" available here.

COMPONENTS
Clamps: 301 Series Stainless Steel, Worm Drive (2 or 4)
Shield: 301 Series Stainless Steel
Gasket: Molded, one-piece, elastomeric sealing gasket
Download Instructions

RECOMMENDED TOOLS: Seekonk Torque Wrench - Pre-Set 60 in/lbs. with .3125” hex head screw

ASTM A240/A240M-06 View
ASTM C564-03 View
ASTM C1277-03 View
CISPI® 310 View
IAPMO FILE 0743 LISTED View
Mission Rubber NO HUB Couplings SubmittalView
Mission Rubber NO HUB Couplings C400c (2 Clamps)
EASY

MISSIONMADE™ products are easy to install and reuse.

LEAKPROOF

Increased band tension secures pipe ends, forming a watertight, root-proof seal.

SECURE

Sealing “O” Rings under each clamp prevent pipe end slippage for a reinforced joint seal.

ADAPTABLE

Independent clamp tightening adapts to different outside pipe diameters. Elastomeric gasket locks circumferentially against corrugated shield.

ANTICORROSIVE

Stainless steel components resist corrosion in marine applications, poorly aerated/moist soils, contaminated grounds conditions, (e.g. industrial fill sites) and chloride, sulfates or bicarbonates in ground water.

RIGID

Corrugated stainless steel controls load bearing between coupling and pipe surface, opposing shear forces while maintaining pipe alignment.

RESILIENT

Synthetic rubbers permit considerable distortion without changing basic physical resistance.

DURABLE

Synthetic rubber gasket resists ultraviolet rays, ozone, fungus growth, natural soil erosive properties, and normal sewer gases.

QUIET

Internal pipe stop reduces noise and vibration.

  1. EASY
  2. LEAKPROOF
  3. SECURE
  4. ADAPTABLE
  5. ANTICORROSIVE
  6. RIGID
  7. RESILIENT
  8. DURABLE
  9. QUIET

NO HUB Couplings

MR PartPartConnectsWidth
C150C18010181.5" CI to 1.5" CI2.125
C200C18020162" CI to 2" CI2.125
C215C18020242" CI to 1.5" CI2.125
C300C18030143" CI to 3" CI2.125
C320C18030223" CI to 2" CI2.125
C400C18040124" CI to 4" CI2.125
C420C18040204" CI to 2" CI2.125
C430C18040384" CI to 3" CI2.125
C500C18050195" CI to 5" CI3.000
C600C18060176" CI to 6" CI3.000
C800C18080138" CI to 8" CI4.000
C1000C181001910" CI to 10" CI4.000

NO HUB Couplings

MR PartPartDescriptionCase Qty.Case Wt. (lbs.)Price
C150C18010181.5" CI to 1.5" CI10023.00$31.30
C200C18020162" CI to 2" CI10025.65$31.30
C215C18020242" CI to 1.5" CI10035.00$36.45
C300C18030143" CI to 3" CI10034.10$37.50
C320C18030223" CI to 2" CI2413.92$57.00
C400C18040124" CI to 4" CI10041.05$44.25
C420C18040204" CI to 2" CI2425.68$80.65
C430C18040384" CI to 3" CI2418.48$67.65
C500C18050195" CI to 5" CI2017.20$107.80
C600C18060176" CI to 6" CI2019.60$112.00
C800C18080138" CI to 8" CI1015.80$211.85
C1000C181001910" CI to 10" CI815.44$279.70