EASTERN STANDARD Shielded Sewer Couplings

Eastern Standard Shielded

Flexible, rubber, shielded sewer couplings connect Clay, Concrete, Cast Iron, Extra Heavy Cast Iron, Plastic, Thinwall Plastic, Armco Truss or Steel pipe to Clay, Concrete, Cast Iron, Extra Heavy Cast Iron, Plastic, Thinwall Plastic, Armco Truss or Steel pipe in sanitary systems. For non-pressure, gravity flow applications only. Recommended for underground installations. Primarily used in the Eastern United States.

Multiple sizes from 6" to 12".

COMPONENTS
Clamps:
Surgical Grade 316 Stainless Steel, Nut & Bolt (2)
Shield: 300 Series Stainless Steel with 300 Series
Stainless Steel, Worm Drive Clamps (2)
Gasket: Molded, One-Piece, Elastomeric Sealing Gasket

LEGEND:  Clay (CL)    Concrete (CONC)    Cast Iron (CI)    Extra Heavy Cast Iron (XHCI)    Schedule 40 Plastic (PL)    Steel (ST)      Thinwall Plastic (TWP)

RECOMMENDED TOOLS: Seekonk Torque Wrench - Pre-Set 60 in/lbs. with .3125” hex head screw

ASTM A240/A240M-06 View
ASTM C425-04 View
ASTM C1173-06 View
Eastern Standard Shielded
EASY

MISSIONMADE™ products are easy to install and reuse.

LEAKPROOF

Increased band tension secures pipe ends, for a watertight, root-proof seal, impervious to infiltration and exfiltration.

SECURE

Sealing “O” Rings under each clamp prevent pipe end slippage for a reinforced joint seal.

ADAPTABLE

Independent clamp tightening adapts to different outside pipe diameters.

ANTICORROSIVE

Stainless steel components resist corrosion in marine applications, poorly aerated/moist soils, contaminated grounds conditions, (e.g. industrial fill sites) and chloride, sulfates or bicarbonates in ground water.

RIGID

Thick, stainless steel shield controls load bearing between coupling and pipe surface, opposing shear forces while maintaining pipe alignment.

RESILIENT

Synthetic rubbers permit considerable distortion withstanding tension and compression. More pliable, easier to install in cold weather applications than elastomeric PVC gaskets.

DURABLE

Extra thick rubber gasket resists ultraviolet rays, ozone, fungus growth, natural soil erosive properties, and normal sewer gases and can be used with or without bushings.

  1. EASY
  2. LEAKPROOF
  3. SECURE
  4. ADAPTABLE
  5. ANTICORROSIVE
  6. RIGID
  7. RESILIENT
  8. DURABLE

NUT & BOLT

MR PartPartConnectsA-MIN (IN)A-MAX (IN)B-MIN (IN)B-MAX (IN)C-WIDTH (IN)
04067696" CL to 6" CL6.887.636.887.634.00
04067936" TYPE O CL or CONC to 6" TYPE O CL or CONC7.758.137.758.134.00
04088078" CL to 8" CL9.2510.069.2510.064.00
041070410" CL to 10" CL11.5012.1311.5012.134.50
041072010" TYPE O CL or CONC/CI/PL/XHCI/ST/TWP to 10" TYPE O CL or CONC/CI/PL/ XHCI/ST/TWP12.5013.1312.5013.134.50
041268412" TYPE O CL or CONC/ARMCO TRUSS to 12" TYPE O CL or CONC/ARMCO TRUSS14.1315.0014.1315.004.50

NUT & BOLT

MR PartPartDescriptionCase Qty.Case Wt (lbs.)Price
04067696" CL to 6" CL2046.00$36.06
04067936" TYPE O CL or CONC to 6" TYPE O CL or CONC2048.60$53.24
04088078" CL to 8" CL1436.40$54.91
041070410" CL to 10" CL1031.00$69.89
041072010" TYPE O CL or CONC/CI/PL/XHCI/ST/TWP to 10" TYPE O CL or CONC/CI/PL/ XHCI/ST/TWP1032.00$82.64
041268412" TYPE O CL or CONC/ARMCO TRUSS to 12" TYPE O CL or CONC/ARMCO TRUSS836.00$99.27