Compression Joint Sealers

To join bell and spigot pipe

CI SV - Service Weight Cast Iron
CI XH - Extra Heavy Cast Iron
TWP - Thinwall Plastic

Other compression joint sealers available.
Call for specific information.

Compression Joint Sealers
Product Name	Description
MR22U 139	2" CI SV Hub to 1-1/2" Sch. 40 Plastic or Steel
MR22U 205	2" CI SV Hub to 2" Sch. 40 Plastic, Steel or CI XH
MR22UX 205	2" CI XH Hub to 2" Sch. 40 Plastic, Steel or CI XH
MR33U 205	3" CI SV Hub to 2" Sch. 40 Plastic, Steel or CI XH
MR33U 305	3" CI SV Hub to 3" Sch. 40 Plastic, Steel or CI XH
MR44U 205	4" CI SV Hub to 2" Sch. 40 Plastic, Steel or CI XH
MR44U 305	4" CI SV Hub to 3" Sch. 40 Plastic, Steel or CI XH
MR44U 401	4" CI Hub to 4" TWP or CI SV
MR44U 405	4" CI Hub to 4" Sch. 40 Plastic, Steel or CI XH
MR44UX 305	4" CI XH HUB to 3" SCH. 40 PL, STEEL or CI XH
MR44UX 405	4" CI XH Hub to 4" Sch. 40 Plastic, Steel or CI XH
MRVY408 401	4" Dickey/Mission Clay Bell to 4" TWP or CI SV
MRVY408 405	4" Dickey/Mission Clay Bell to 4" Sch. 40 PL, Steel, or CI XH
MRVY608 405	6" Dickey/Mission Clay Bell to 4" Sch. 40 PL, Steel, or CI XH
MRVY608 609	6" Dickey/Mission Clay Bell to 6" Sch. 40 PL, Steel

90° Ell Fittings

Flex Fittings

The flexible way to repair, change or replace drain waste and vent fittings.
300 Series stainless steel worm drive clamps for corrosion and rust resistance
Fittings connect plastic, cast iron, copper or steel pipe. Reducer bushings make connections to smaller sizes.

90° Ell Fittings
Product Name	Size	Angle
M90L 150	1-1/2"	90°
M90L 200	2"	90°
M90L 300	3"	90°
M90L 400	4"	90°

Tee Fittings

Flex Fittings

The flexible way to repair, change or replace drain waste and vent fittings.
300 Series stainless steel worm drive clamps for corrosion and rust resistance
Fittings connect plastic, cast iron, copper or steel pipe. Reducer bushings make connections to smaller sizes.

Tee Fittings
Product Name	Size
MTY 150	1-1/2"
MTY 200	2"
MTY 300	3"
MTY 400	4"

Bushings for Fittings

Flex Fittings

The flexible way to repair, change or replace drain waste and vent fittings.
300 Series stainless steel worm drive clamps for corrosion and rust resistance
Fittings connect plastic, cast iron, copper or steel pipe. Reducer bushings make connections to smaller sizes.

Bushings for Fittings
Product Name	Size
MB 215	2" x 1-1/2"
MB 32	3" x 2"
MB 325	3" x 2-1/2"
MB 43	4" x 3"

“O” Ring

Compression Ring used in joining 6" inside diameter pipe to 4" outside diameter Cast Iron, Schedule 40 Plastic or Steel Pipe

“O” Ring
Product Name	Size
MR 64	6" x 4"

Shower Drain Connectors

Shower Drain Connectors
Product Name	Description
MSD 200	Shower Drain Connector (AB & A, Casper, Armstrong, Kohler, Intercon and Shaul)
MSD 210	Shower Drain Connector (Mustee or Owens Corning)

56 Exp Series

Cast Iron/Plastic to Cast Iron/Plastic Expansion Joint

56 Exp Series
Product Name	Size	A Min	A Max	B Min	B Max	C Length
MR56 15EXP	1-1/2" x 1-1/2"	1.81	2.00	1.81	2.00	3.5
MR56 22EXP	2" x 2"	2.30	2.50	2.30	2.50	3.5
MR56 33EXP	3" x 3"	3.25	3.50	3.25	3.50	4.0
MR56 44EXP	4" x 4"	4.21	4.50	4.21	4.50	4.0

TC & DTC Series

Drain Piping to Tubular Trap

TC & DTC Series
Product Name	Size	A Min	A Max	B Min	B Max	C Length
MRTC 150	1-1/4" x 1-1/2"	1.25	1.50	1.25	1.50	2.5
MRTC 150DS*	1-1/4" x 1-1/2"	1.25	1.50	1.25	1.50	2.5
MRDTC 110	3/4" - 1-1/4" Copper or Plastic 1-1/4" or 1-1/2"	.875	1.375	1.62	1.90	2.5
MRDTC 150	1-1/4" or 1-1/2" x 1-1/4" or 1-1/2"	1.25	1.50	1.62	1.90	2.5
MRDTC 150DS*	1-1/4" or 1-1/2" x 1-1/4" or 1-1/2"	1.25	1.50	1.62	1.90	2.5
MRDTC 210	2" x 1" or 3/4" Copper or Plastic	2.12	2.40	.875	1.31	2.5
MRDTC 215	2" x 1-1/4" or 1-1/2"	2.12	2.40	1.25	1.50	2.5
MROS 150	1-1/4" or 1-1/2"	1.25	1.50	1.25	1.50	2.5

* DS indicates part made of soft flexible grey vinyl

“J” Bend

Flexible Rubber “J” Bend

Product Name	Size	A Min	A Max
MJB 150	1-1/4 or 1-1/2 Drain Pipe to 1-1/2 Drain Pipe or Tubular	1.25	1.90

Dishwasher Connector

Product Name	Description
MDWC 100	Dishwasher Connector

Clothes Washer Connector

Hose Grip Clothes Washer Connector

Eliminates washing machine hose leaks and spills
Flexible rubber securely holds washer drain hose to any 1-1/2" or 2" standard laundry standpipe
Fits most washing machine hoses sizes 1" to 1-7/16" diameter

Product Name	Description
MRHG-1	Hose Grip Connector

Mission Rubber Company LLC
1660 Leeson Lane, Corona, CA 92879
Mailing Address: Mission Rubber Company LLC, P.O. Box 2349, Corona, CA 92878-2349
Phone: (800) 854-9991 Fax: (800) 637-4601
Intl. Phone: (951) 736-1343 Intl. Fax: (951) 736-0481